GRADUATE STUDENTS
M.ENG.
| Completed | |||
| Student | Year | Title | Co-supervisor |
| Ian Moore | 1987 | "Synthesis of Energy Integrated Distillation Sequences" | |
| Chris Maier | 1989 | "Knit Lines in Reaction Injection Moldings" | P.E. Wood |
| Atsushi Mizoguchi | 1991 | "The Effect of Control Structure on Real-time Optimization" | T.E. Marlin |
| J. Kirk Bailey | 1991 | "Nonlinear Optimization of a Hydrocracker Fractionation Plant" | S. Treiber |
| Geoffrey McIlwraith | 1991 | "An Expert System for Control of a Thermomechanical Pulp Refining System" | P.A. Taylor |
| Andrew Ho | 1992 | "Impingement Mixing for reaction injection molding" | P.E. Wood |
| W. Bradley MacDonald | 1992 | "Interior Point Algorithms for Refinery Scheduling Problems" | S. Treiber |
| Michael Thompson | 1994 | "Simultaneous Scission and Cross-linking of HDPE in a Twin Screw Extruder" | A.E. Hamielec |
| Tamara McCaw | 1995 | "Two Layer Optimization of a Catalytic Reformer" | T.E. Marlin |
| Bruce Watson | 1995 | "Examination of Dynamic Rectangular Secondary Clarifier Models" | G. Patry |
| Michael Kempe | 1995 | "Dynamic Model of Pulp Washers" | R.H. Pelton |
| John Brydges | 1996 | "Issues in Real Time Optimization: The gas and liquid Recovery Section of a Fluidized Catalytic Cracking Unit" | T.E. Marlin |
| Heather Wright | 1996 | "Structural Reaction Injection Molding: Rheology and Kinetics" | |
| Shawn Taylor | 1997 | "Two Layer Slot Coating: Study of Die Geometry and Interfacial Region" | |
| Chunliang Zhang | 1998 | "Simultaneous Data Reconciliation and Parameter Estimation for Real-Time Optimization" | C.M. Crowe |
| Willard Martin | 1999 | "Reactive Extrusion of Esters" | |
| Dominic Sinopoli | 1999 | "Mixing in reaction injection molding" | P.E. Wood |
| In Progress | |||
| Warren Reynolds | "Optimal Design of Injection Mold Cooling Channels" | M. Elbestawi | |
| Jean-Francois Dube | "Scheduling of Pulp Mill Operations" | T.E. Marlin | |
| Hector Larrazabal | "Polymer Slip at Die Walls" | ||
| Shiping Liu | "Particle Image Velocimetry of Polymer Mixing Flows" | P.E. Wood | |
| A. Neil Smith | "Extrusion of Metallocene Polyolefins" |
PhD
| Completed | |||
| Harilaos Mavridis | 1988 | "Finite Element Studies in Injection Mold Filling" | J. Vlachopoulos |
| Aristotelis Karagiannis | 1989 | "Modelling of Single Component and Bicomponent Extrusion Flows" | J. Vlachopoulos |
| Ronald Yeo | 1993 | "A Numerical Study of Jet-to-Jet Impingement In a Mixing Head" | P.E. Wood |
| Panagiotis Seferlis | 1995 | "Collocation Models for Distillation Units and Sensitivity Analysis Studies in Process Optimization" | |
| Agustin Torres | 1995 | "Finite Element Analysis of Layer Non-Uniformity in Coextrusion Flows" | J. Vlachopoulos |
| Ashok Tyagi | 1997 | "Jet to Jet Impingement in a Confined Space" | P.E. Wood |
| Victor Bravo | 1998 | "3-D Modelling of the Flow in Kneading Disk in an Intermeshing Twin-Screw Extruder" | J.D. Wright |
| Alberto Rincon | 1999 | "Stability in Coextrusion Die Flows" | J. Vlachopoulos |
| Farhad Sharif | 1999 | "3-D Modelling of Viscoelastic Multilayer Flows" | J. Vlachopoulos |
| In Progress | |||
| Leming Gu | "Reactive Extrusion Grafting to Produce Flocculants" | S. Zhu | |
| Jinsong Wang | "Experiments and Modelling in Pulp Mat Formation in Kraft Pulp Washers" | R. Pelton |